In this post, we will discuss the Rockspace extender’s malfunctioning problem. If you are here, you must be dealing with these issues. There are many possible reasons for your Rockspace extender to stop working. Here are some tips to solve this issue.
Rockspace Extender Is Having No Signal Light:
If there is no solid light on the extender in this situation, you can disconnect from the router. When you update the software or change the Wi-Fi password, it occurs.
Try to follow these steps to fix your problem:
- First, you can try to power cycle your extender or router if you do not update the firmware on your router and extender.
- Resetting and rearranging your extender both are essential, if you want to change your Wi-Fi password. After that, you can visit re.rockspace.local and follow the instructions if you don’t know how to reset it.
- Next, don’t connect your Rockspace extender to a powerline adapter.
- The device’s power connection is frequently impacted by surge protectors.
- Examine the power cable’s condition.
- Lastly, make sure that the electrical socket is active.
Red Light On Rockspace WiFi Extender:
You have some network issues if the red light on your Rockspace extender is on. If your Rockspace extender is unable to receive signals from your router, there are probably several walls between them.
Try to follow these steps to fix your problem:
- First, join the WiFi network with the extender. Your extender may manually or independently configure.
- Now, you can verify the WiFi channel setting on the router. Increase or put the channels in automatic mode.
- After that, for good performance if you don’t know how to update firmware, you can use re.rockspace.login.
Lights On The Rockspace Extender Are Blinking:
If your Rockspace extender displays a blinking light in this situation, it may be a hardware issue or a firmware issue.
Try to follow these steps to fix your problem:
- Your Rockspace extender can possibly be reset. When the power connects, hold down the reset button for 30 seconds.
- Boost the Firmware of Your extender.
- If your device is still covered by warranty, then you may try to replace it in the alternative scenario.
Examine The Switch Board:
If your WiFi extender is having trouble picking up signals from the host router, make sure the power off outlet properly connects to the router. Connect your extender directly to the socket if your router was previously wired to a power strip or extender.
Move Your Extender To A Different Location:
When your extender and router are far away from each other, then it is very difficult to connect your extender to the router. Close your router while positioning your extender. After this, your router device receives high-speed internet signals in this process.
Connectivity Of Wires:
Ensure that there is a tight connection between the ethernet cable and the ethernet port. Because if it’s loose, then your wireless network could experience issues. It causes a serious problem. So if your internet begins to slow down, then check your ethernet cable.
Unassisting Security Protocols:
If you are still facing issues with your internet connection, it is likely that your router uses incompatible or dissimilar security protocols. Check your router’s security protocols to see, they are compatible with WiFi extenders. WPA, WPA2, and WPA3 are supported by the security protocols of Rockspace WiFi devices. Now, verify that your router can use these encryption standards.
Restart Your Rockspace WiFi Extender:
If the above step does not help you to solve this problem then try to reset your extender. Your connection issue might resolve if you drop any incoming interference and disrupt the router signal.
- Firstly, you should hit the reset button on your Rockspace WiFi repeater.
- Secondly, you can find a reset button on your Rockspace WiFi extender and press it for just 10 seconds.
- After that resetting your router and extender easily connect with each other.
If you have done all these and still you are struggling with your Rockspace WiFi extenderThen you need to upgrade your Rockspace WiFi extender.
How to Update Your Extender’s Firmware?
If you’re using a wireless extender, it is wise to examine and update your extender’s firmware as well. To check the Firmware version of your device, use the IP address of your extender as URL. There you have to check whether the firmware is up to date or not. If not, then follow the further steps on your screen for extender firmware update.
- Once you are logged in to the Rockspace WiFi extender page, then you have to click on the Administration option.
- Now, choose the firmware update.
- For your computer’s latest firmware, you will need to locate the file.
- Click on the install and it will take some time to upgrade your Rockspace WiFi extender firmware.
- Your Rockspace WiFi extender will reboot, during the upgrade.
- Make sure your power button should be on. If it is off then the extender will malfunction.
To Conclude
In this article, we hope you will learn all about fixing the Rockspace WiFi extender and you will know about the LED’s light of your extender. But if you are facing any problem, then discuss it with us.
